Skip to main content

𝐄𝐥𝐞𝐯𝐚𝐭𝐨𝐫 - 𝐂𝐨𝐧𝐭𝐫𝐨𝐥 𝐒𝐮𝐫𝐟𝐚𝐜𝐞




➡️ Control surface of an airplane used to control its attitude in pitch.

➡️ Elevators are used to climb and decent. There are two elevators which work in pairs, both move up or both move down and both are on each side of the fuselage.

➡️ As the elevators raise upwards, the air stream acting on it will pitch up the nose. As the elevator lowers downwards, the air stream will act to pitch down the craft.

➡️Subscribe us for more aircraft knowledge and aircraft fact⬅️ 

➡️Do Share with your Friends⬅️
Labels:

Comments

Post a Comment

Popular posts from this blog

𝐖𝐞𝐭-𝐒𝐮𝐦𝐩 𝐎𝐢𝐥 𝐒𝐲𝐬𝐭𝐞𝐦

Wet Sump Oil System ✳️The engine oil system performs several important functions: 🛩️Lubrication of the engine’s moving parts . 🛩️Cooling of the engine by reducing friction . 🛩️Removing heat from the cylinders . 🛩️Carrying away contaminants . 🛩️Providing a seal between the cylinder walls and pistons. ➡️Subscribe us for more aircraft knowledge and aircraft fact⬅️ ➡️Do Share with your Friends⬅️
Post a Comment
Read more

𝐓𝐲𝐩𝐞𝐬 𝐨𝐟 𝐂𝐨𝐦𝐛𝐮𝐬𝐭𝐢𝐨𝐧 𝐂𝐡𝐚𝐦𝐛𝐞𝐫𝐬

🛩️A combustor is a component or area of a gas turbine, ramjet, or scramjet engine where combustion takes place. It is also known as a burner, combustion chamber or flame holder. In a gas turbine engine, combustion chamber is fed high pressure air by the compression system. 🛩️The combustor then heats this air at constant pressure. After heating, air passes from the combustor through the nozzle guide vanes to the turbine. In the case of a ramjet or scramjet engines, the air is directly fed to the nozzle. 𝐀𝐧𝐧𝐮𝐥𝐚𝐫 𝐓𝐲𝐩𝐞 ✈️The most commonly used type of combustor is the fully annular combustor. Annular combustors do away with the separate combustion zones and simply have a continuous liner and casing in a ring. There are many advantages to annular combustors, including more uniform combustion, shorter size, lighter, and less surface area. Annular combustors tend to have very uniform exit temperatures. They also have the lowest pressure drop of the three...
Post a Comment
Read more

𝐂𝐥𝐨𝐮𝐝𝐬

Basic Clouds 🛩️Cloud type is determined by its height, shape, & characteristics. They are classified according to the height of their bases as low, middle, or high clouds, as well as clouds with vertical development. 🛩️Low clouds are those that form near the Earth’s surface and extend up to about 6,500 feet AGL. They are made of water droplets but can include supercooled water droplets that induce hazardous aircraft icing. Typical low clouds are stratus, stratocumulus, nimbostratus. Fog is also low cloud formation. This Clouds create low ceilings, hamper visibility, & can change rapidly. They influence flight planning & can make visual flight rules (VFR) flight impossible. 🛩️Middle clouds form around 6,500 feet AGL & extend up to 20,000 feet AGL. They are composed of water, ice crystals, & supercooled water droplets. Typical middle-level clouds include altostratus & altocumulus. These types of clouds are encountered on cross-country flights at highe...
Post a Comment
Read more