𝐓𝐡𝐫𝐮𝐬𝐭 𝐑𝐞𝐯𝐞𝐫𝐬𝐚𝐥

🛫It is the temporary diversion of an aircraft engine's thrust so that it is directed forward, rather than backward.

🛫Reverse thrust acts against the forward travel of the aircraft, providing deceleration.

🛫Thrust reverser systems are featured on many jet aircraft to help slow down just after touch-down, reducing wear on the brakes and enabling shorter landing distances.

🛫Such devices affect the aircraft significantly and are considered important for safe operations by airlines.

🛫There have been accidents involving thrust reversal systems, including fatal ones.

🛫Reverse thrust is also available on many propeller-driven aircraft through reversing the controllable-pitch propellers to a negative angle.

🛫The equivalent concept for a ship is called astern propulsion.

➡️Subscribe us for more aircraft knowledge and aircraft fact⬅️

➡️Do Share with your Friends⬅️

Comments

𝐖𝐞𝐭-𝐒𝐮𝐦𝐩 𝐎𝐢𝐥 𝐒𝐲𝐬𝐭𝐞𝐦

Wet Sump Oil System ✳️The engine oil system performs several important functions: 🛩️Lubrication of the engine’s moving parts . 🛩️Cooling of the engine by reducing friction . 🛩️Removing heat from the cylinders . 🛩️Carrying away contaminants . 🛩️Providing a seal between the cylinder walls and pistons. ➡️Subscribe us for more aircraft knowledge and aircraft fact⬅️ ➡️Do Share with your Friends⬅️

𝐕-𝐭𝐚𝐢𝐥 𝐂𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧

🛩️In aircraft, a V-tail is an unconventional arrangement of the tail control surfaces that replaces the traditional fin and horizontal surfaces with two surfaces set in a V-shaped configuration. 🛩️The aft edge of each twin surface is a hinged control surface (sometimes called a ruddervator) which combines the functions of both a rudder and elevators. 🛩️Ruddervators are the control surfaces on an airplane with a V-tail configuration. They are located at the trailing edge of each of the two airfoils making up the tail of the plane. 🛩️Ruddervators provide the same control effect as conventional control surfaces, but through a more complex control system that actuates the control surfaces in unison. 🛩️Yaw moving the nose to the left is produced on an upright V tail by moving the pedals left which deflects the left-hand ruddervator down and left and the right-hand ruddervator up and left. The opposite produces yaw to the right. 🛩️Pitch nose up is prod

𝐆𝐥𝐢𝐝𝐞 𝐒𝐥𝐨𝐩𝐞

Glide Slope 🛩️glide slope of ILS is defined as a system of vertical guidance embodied in the Instrument Landing System which indicates the vertical deviation of the aircraft from its optimum path of descent. 🛩️A glide slope station uses an antenna array sited to one side of the runway touchdown zone. The GS signal is transmitted on a carrier signal. 🛩️The centre of the glide slope signal is arranged to define a glide path of approximately 3° above horizontal (ground level). The beam is 1.4° deep (0.7° below the glide-path centre and 0.7° above). 🛩️The pilot controls the aircraft so that the glide slope indicator remains centered on the display to ensure the aircraft is following the glide path to remain above obstructions and reach the runway at the proper touchdown point (it provides vertical guidance). 🛩️Two signals are transmitted on one of 40 ILS channels. One is modulated at 90 Hz, the other at 150 Hz. These are transmitted from co-located antennas. Each antenna

The Aviation Science

Search This Blog